Perimeter

Build a safe zone that civilians can reach

Choose an accessible street, keep your first perimeter manageable, and check the approach before you expand.

Draw your first zone around a block with a street civilians can approach. Put a Gate on that approach, end the Evac Corridor there, and defend the space where the crowd actually enters.

Choose the entrance first

Pick a street that connects a nearby crowd to the block you want to shelter. Draw the zone with Safe Zone in the Build menu, then add a gate where the planned approach meets your wall. Keep the approach in view when placing defenses. Check a possible detour around a building or canal in the Evac Corridor guide.

Check the perimeter

If you see… Try in the next setup
Civilians bunch against solid wall Move the corridor endpoint to an actual opening or position a gate at the intended crossing
The short route crosses water Choose a connected bank or route the crowd toward a reachable bridge
The approach comes under pressure before anyone reaches the gate Try a shorter path from a closer crowd and compare where the first group gets cut off
New zone space adds more entrance length than useful nearby shelter Try a smaller footprint and spend the released budget on reaching or covering the gate

Keep the approach clear of manual strikes

The v0.43.1 rules protect civilians and safe-zone walls from all mortars and some other listed assets. Manual strikes still damage them. Check the friendly-fire table before aiming near a gate with a queue.

Sources & verification